Half sheet pan dimension

What are sheet pan sizes?

Quarter sheet pans are typically 9 by 13 inches (a standard size for sheet cakes), half sheet pans are 18 by 13 inches (this is the size of most pans described simply as baking sheets) and full sheet pans are 26 by 18 inches (too big to fit in many home ovens, but the standard commercial size).

What is the difference between a jelly roll pan and a half-sheet pan?

Most jelly roll pans are a bit smaller than half sheet pans, which tend to be 13” by 18” and around 1” deep. … 1/4 size jelly roll pans measure approximately 9″ by 13″ and 1″ deep. 1/2 size jelly roll pans tend to be around 12” by 17” and 1” deep.

What is a half sheet cake?

A half sheet cake, or 1/2 sheet cake, is a large rectangular-shaped cake that is normally served at a party or any time a crowd is expected. Because of the difference in available pan sizes, half sheet cakes come in a variety of sizes.

What is a 1/4 sheet pan?

The quarter sheet pan is 9 1/2? x 13? (24 x 33cm) and the one-eighth pan clocks in at a mere 6? x 9? (13 x 23cm). If you’re concerned about cooking on aluminum, which is an excellent – and even – conductor of heat, bakers line baking sheets with parchment paper or silicone baking mats.

How many 9×13 pans are in a half sheet pan?

It would seem like a no-brainer that doubling a 9` x 13` recipe would be perfect in a 13` x 18` half-sheet pan. After all, 117 x 2 = 234 exactly.

What size pan is a jelly roll pan?

What is a jelly roll pan, you ask? Compared to half-sheet pans, which are 18×13`, jelly roll pans are smaller, usually about 15×10`. Jelly roll pans have 1`-high sides, sufficient for containing the batter as it rises in the oven. Use your jelly roll pan to make a bûche de Noël.

How big is a half sheet jelly roll pan?

A jelly-roll pan (either 15 ½ by 10 ½ inches or 18 by 12 a.k.a. a half-sheet pan) has 1-inch-high sides and is perfect for making cake rolls; it can stand in for a cookie sheet in a pinch. It’s also a terrific roasting pan for veggies and more.

How many inches is a half sheet cake?

When you receive a half sheet cake in the bakery, it’s usually either 15 inches by 11 inches, 15 1/2 inches by 10 1/2 inches, or even as large as 16 inches by 12 inches. Since house ovens are smaller compared to bakery or supermarket ovens, a house half sheet cake will probably measure 13 inches by 9 inches.

How many pieces of cake are in a half sheet?

A half sheet cake has up to 36 servings. A full sheet cake has up to 64 servings.

How many does a 1/2 sheet cake serve?

A half-sized sheet pan will make 58 servings and a quarter-sized pan will make 30 servings.

What size is a 2 3 sheet pan?

2/3 Size Sheet Pan

A 2/3 size sheet pan’s dimensions are 16” x 22”. As the largest baking sheet a standard 30” oven will accommodate, the 2/3 sheet pan size is ideal for home bakeries.

What size is a 3/4 sheet pan?

Three Quarter Sheet Pan | Chicago Metallic 41500 3/4 Size Sheet Pan (15` x 21`)

What is 1/8 of a sheet cake?

Custom 1/8 Sheet Cake

What is half of a 15×10 pan?

I yelled to Bob, `What’s half of a 15-by-10 jelly roll pan?” Bob yelled back, “Use your 11-by-7 pan.” He figured the area by multiplying the length by the width of the pan, getting 150 square inches. Half of that amount will fit comfortably in the 11-by-7 rectangle, 77 square inches.

Can I use 9×9 instead of 8×8?

Not so hard! Just by glancing at the two pans, you might think that a 9-inch pan is very close in size to an 8-inch pan of the same shape, thus making it a reasonable substitute. But if you check the chart, you’ll find that a 9-inch square pan is more than 25% larger than an 8-inch square pan.

Can I use a 9 pan instead of 8?

Think about whether the recipe should even be changed.

The batter is not finicky, and because you’re not worried about them rising much, you can easily use a 9-inch pan instead of an 8-inch or vice versa.

Is a sheet pan the same as a cookie sheet?

The main difference comes down to the rim. Sheet pans and jelly roll pans have a tall rim that’s typically around an inch high. Baking sheets and cookie sheets typically have either no rim or one slightly raised grabbing edge.

How many boxes of cake mix does it take for a half-sheet cake?

Will a half sheet pan fit in a standard oven?

Help, I’m spiraling. Okay, so when it comes to sheet pans, size matters. Typically, we recommend a half-sheet pan, which is about 18×13″ and is big enough for most home cooks but small enough to fit easily into your apartment oven.

Can I use a 9×13 pan instead of a jelly roll pan?

It depends what you are baking. Jelly roll pans are very similar to cookie sheets; if you are making cookies, biscuits, anything that bakes on a flat surface, a cookie sheet will work. If you want to make jelly rolls make sure your pan had any sort of edge, even if it is just a cookie sheet.

How big is a half slab cake?

When you get a half sheet cake from a bakery, it is generally either 15 inches by 11 inches, 15 1/2 inches by 10 1/2 inches or even as big as 16 inches by 12 inches. Since home ovens are smaller than bakery or grocery store ovens, a home half sheet cake will likely measure 13 inches by 9 inches.

What are the dimensions of a Walmart sheet cake?

Walmart offers multiple custom cake sizes, including ?, ¼, ½, and full sheet cakes, as well as 6”, 8”, and 10” round cakes. Select the cake flavor (chocolate, vanilla, marble, or yellow). Walmart offers the option to add strawberry or bavarian cream filling to your cake at an additional cost. Choose the type of icing.

How much is a half sheet cake?


How much cake do I need for 25 guests?

10 in cakes can be sensibly served to up to 25 people with each slice measuring about 1 1?4 inches across the back or about the width of a teaspoon. As with the 8 inch cakes, 10 inch cakes can be served event style. Cut event style, a 10 inch cake can be served to as many as 39 people.

How do you cut a half sheet cake?

Is a 12×18 a full sheet cake?

If the cake is 4″ tall then you use the wedding cake size of 1x2x4 and get 108 servings. A 12 X18 sheet pan is the standard half sheet for professional bakeries and cut into 2 x 2 inches serves 54 people. Professional bakeries literally use a sheet pan for a full sheet cake. Hence the terms full sheet, half sheet etc.

How many pieces of cake are in a 9×13 pan?

Rectangular Cake

The most common size for homemade cake recipes is a large rectangle. It’s baked in a standard 9-by-13-inch cake pan. This is a perfect size for parties, and you can expect to get between 12 and 20 slices from a single cake.

What size sheet cake will feed 50?

Cutting the quarter sheet cake into small pieces will serve more people. Normally, a quarter sheet cake will serve anywhere between 30 and 50 people.

How many does a 9×13 sheet cake serve?

Cake Baking & Serving Guide

Frequent Searches Leading to This Page

Half sheet pan size in inches, Half sheet pan size in cm, Sheet pan sizes chart, 1/2 sheet pan size, Jelly roll pan size, Half sheet size, Standard cookie sheet size, 1/4 sheet pan size.

Categories H

Leave a Comment